YOUR CART

Your cart is empty

{{cartitem.name}} Colour: {{cartitem.colour}} Size: {{cartitem.size}}
${{formatNumber(cartitem.unitprice)}} WAS ${{formatNumber(cartitem.baseunitprice)}}
${{formatNumber(cartitem.unitprice)}}
Sub Total ${{totals.itemtotal}}
Delivery ${{totals.freight}}
Total ${{totals.grandtotal}}
CHECKOUT KEEP SHOPPING
Check Stock Instore
RRP Enduroguard White

Auckland

  • Auckland
  • Waikato
  • Bay Of Plenty
  • Manawatu/Wanganui
  • Wellington
  • Canterbury
Bike Barn New Lynn No stock
Bike Barn Albany In Stock
Bike Barn Central In Stock
Bike Barn Manukau No stock
Bike Barn Mt Wellington In Stock
Bike Barn Takapuna In Stock
Bike Barn Hamilton No stock
Bike Barn Rotorua In Stock
Bike Barn Mount Maunganui In Stock
Bike Barn Palmerston North No stock
Bike Barn Kapiti Low Stock
Bike Barn Wellington No stock
Bike Barn Homebase No stock
Bike Barn Hornby Low Stock

*Due to constantly changing stock levels we recommend contacting your local store HERE when stock is low before visiting the store. If the Bike you are interested in is not in-stock at your local store, don't worry, our friendly web team will be happy to look into it for you HERE.

RRP Enduroguard White
RRP Enduroguard White

RRP Enduroguard White

$19.99
Pay by What's this?
Add to Cart
Compare
Check Local Store Stock

AVAILABLE IN 2 SIZES:STANDARD for forks from 80mm to 120mm travel LARGE for forks from 130mm to 200mm travel

USAGE The ENDUROGUARDTM is designed as a FRONT or REAR mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), our snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. FRONT MUDGUARD The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the STANDARD and the LARGE are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. REAR MUDGUARDThe holes for the fork brace aren't ideally located when using it as a REAR mudguard, so we built in 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the STANDARD and the LARGE sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the Small number of bikes that have a dropped rear brace).Choose either the STANDARD or LARGE size depending on what rear protection you want to achieve (STANDARD would be the default size recommendation).

Read More

Reviews Write a review

0 Reviews
5 Stars 0
4 Stars 0
3 Stars 0
2 Stars 0
1 Stars 0

Be the first to review

RRP Enduroguard White